#LOGITECH G903 LIGHTSPEED SOFTWARE HOW TO#

If you are checking for blockages in the wand and can’t see any, you can use a long item, such as a bent hanger, to get higher up. Make sure that the floor nozzle and all the hoses are clear. Suction can also be affected by a blockage in your vacuum system. The filters are made of a felt frame and can safely be rinsed underwater.īe sure that the filters have a significant amount of time to dry before you put them back into your Shark Duoclean vacuum, otherwise, you’re setting yourself up for an electrical risk. You can find your filters after you remove your dust cup. Like with the dust cup, to operate properly your vacuum needs to be cleaned often. If your Shark Duoclean has no suction and the dust cup is empty, check your filters. If this is not the cause, there are a few other problems that could be the culprit.

If it’s full, your vacuum will have no suction. Your dust cup should always be emptied after you use your Shark Duoclean vacuum. It is a very frustrating problem as the sole purpose of your vacuum is to remove dust and debris from your flow. If your Shark Duoclean vacuum is turned on and sounds normal, but has no suction, there can be a few issues behind this. Reattach the wand and your brushroll should begin to spin again. If your wand has not fully been reattached after using it your vacuum will assume that you are still trying to use the wand. There could also be an issue with your nozzle. You want to be sure that your brushroller is fully attached before you go to use your vacuum. Put the brushroll back in and make sure that you fully clip it in before closing the brushroll lid. Also, check behind the brushroll to see if there are any additional blockages behind the brushroll. Once you’ve removed the brush, carefully remove anything that has become wrapped around the brush. This will allow you to pull the brush out. Open the brushroll lid and press the two release buttons at the back of your Shark Duoclean vacuum. If your Shark Duoclean vacuum brush is not spinning, one of the most common issues is that there is something wrapped around one of the brushes. If you are, there are a few other areas to check. First, make sure that you are operating your vacuum in the correct setting. When your Shark Duoclean vacuum brushes are not spinning you will be unable to pick up the majority of dust and debris on certain floorings. The good news is that if your Shark Duoclean vacuum is not working, you can do several fixes yourself. As vacuums are used frequently, you can run into the risk of overheating them or forgetting to do general maintenance in a timely fashion. Common issues are clogs, power issues, and the motor. If your Shark Duoclean vacuum is not working, there are a few things to check.

#LOGITECH G903 LIGHTSPEED SOFTWARE HOW TO#

They are also very expensive vacuums, meaning that when you run into an issue, you need to know how to fix it. They are designed to be lighter than most vacuums and are adaptable on both hardwood and carpeted surfaces. Shark Duoclean vacuums are a desirable model.

Logitech g903 lightspeed software